Lie-Nielsen Toolworks Australia | Replacement Blades

We offer a selection of replacement blades for other maker's planes. We make these with the same care and to the same standards as blades for our own tools. All of our blades are now cryogenically treated A-2 Tool Steel. (See A Note About Thicknesses, below.)

(To order replacement blades for Lie-Nielsen tools, see the individual tool pages.)

Lie-Nielsen A-2 Blades to upgrade your
Stanley Adjustable Mouth Block Plane
(see below)

To purchase blades from our secure online catalog, first specify quantities in the left column, then click on the "Add Item(s) To Shopping Cart" button at the bottom of the page. From there you may proceed to our secure ordering pages. Click here for a metric conversion chart.

(Some of these blades will have possible shipping delays.)

A Note About Replacement Chipbreakers
Lie-Nielsen chipbreakers are designed specifically for our tools. It is possible that they may fit some original Stanley or Record planes, but critical dimensions of these and other maker's tools have varied over the years. So, if you need a custom chipbreaker for a non-Lie-Nielsen tool, click here.

Bench Plane Blades
Qty:	BL-ST2	Stanley No. 2 Blade (.095 inch thick)	$69.00
Qty:	BL-ST3	Stanley No. 3, 5-1/4 Blade (.095 inch thick)	$69.00
Qty:	BL-ST4/5	Stanley No. 4, 5 Blade (.095 inch thick)	$69.00
Qty:	BL-ST4-1/2/6/7	Stanley No. 4-1/2, 6, 7 Blade (.095 inch thick)	$79.00
Qty:	BL-ST8	Stanley No. 8 Blade (.095 inch thick)	$89.00
Qty:	BL-ST10	Stanley No. 10, 10-1/4, 10-1/2 Blade (.095 inch thick)	$79.00
Qty:	BL-ST-5.5	Stanley No. 5-1/2 Blade (2-1/4 inch wide .095 inch thick)	$79.00
Block Plane Blades
Qty:	BL-ST102	Stanley No. 102 Blade (.110 inch thick)	$49.00
Qty:	BL-ST103	Stanley No. 103 Blade (.095 inch thick)	$59.00
Qty:	BL-ST-9.5B	Stanley 9 1/2 Replacement Blade New Style 3 Slots, 1-5/8" wide	$59.00
Qty:	BL-ST-9.5A	Stanley No. 9 1/2 Replacement Blade Old Style 11 Slots, 1-5/8" wide	$59.00
Qty:	BL-ST-60.5B	Stanley 60 1/2 Replacement Blade New Style 3 Slots, 1-3/8" wide	$59.00
Qty:	BL-ST-60.5A	Stanley 60 1/2 Replacement Blade Old Style 11 Slots, 1-3/8" wide	$59.00
Qty:	BL-ST140	Stanley No. 140 Blade (1/8 inch thick)	$54.00
Qty:	BL-ST62	Stanley No. 62 Blade (1/8 inch thick)	$69.00
Qty:	BL-ST95	Stanley No. 95 Edge Plane Blade (1/8 inch thick)	$49.00
Specialty Blades
Qty:	BL-RR073	Record No. 073 Blade (.150 inch thick)	$66.00
Qty:	BL-ST112	Stanley No. 112 Blade (.095 inch thick)	$64.00
Qty:	BL-ST78	Stanley No. 78 Blade (1/8 inch thick)	$49.00
Qty:	BL-ST97	Stanley No. 97 Large Chisel Plane Blade (1/8 inch thick)	$59.00
Qty:	BL-ST98	Stanley No. 98 Side Rabbet Blade (.112 inch thick)	$29.00
Qty:	BL-ST99	Stanley No. 99 Side Rabbet Plane (.112 inch thick)	$29.00

Toothed Blades

A NOTE ABOUT THICKNESSES: All replacement Block Plane blades will be 1/8" thick, unless otherwise noted, (tools with a fixed opening between cap and blade like the 102, where the cap is positioned under a pin riveted in the body of the tool and therefore the maximum thickness the blade can be is fixed) as we prefer to use as thick a blade as possible.
Replacement blades for Bench Planes must be thinner to fit the original Stanley, Record or other makers' Bench Planes. If the blade is too thick, the yoke on your plane will not properly engage the slot in the Chipbreaker, The Chipbreaker Screw may not be long enough to install the Chipbreaker at all, but most important the mouth opening may not be large enough to allow the blade, or a shaving, to pass.
Therefore, Bench Plane blades ordered from the list above, identified by width, will be .095" thick, which will work fine on most Bench Planes. Blades of the same width, ordered as replacement blades for our own planes, identified by the tool number (e.g., BL-4) will be thicker (.125" for the 4 and 5, .140" for the 4-1/2 and .175" for the No. 8.)

(To order replacement blades for Lie-Nielsen tools, see the individual tool pages.)

Top of Page